Striking and planchet coin errors are mint mistakes that happen when a coin is struck in the press or because the metal blank, known as the planchet, was faulty before striking. They include off-center strikes, double strikes, brockages, struck-through errors and clipped planchets. Each is a type of error coin: a genuine coin from an official mint that left with a production flaw.
These errors differ from die errors, where the die itself is flawed and every coin it strikes shares the fault; those are covered under die-related coin errors. Striking and planchet errors are usually one-off events affecting a single coin or a small batch. Understanding them requires knowing the coin minting process: blanks are punched from metal strip, a press holds each blank between two dies inside a collar, and a single blow forms the design. Most such errors are caught by mint inspection, and those that escape are studied in numismatics.
Off-Center Strike
An off-center strike happens when the blank is not correctly seated between the dies at the moment of striking. Only part of the design lands on the coin, and the rest of the blank is left as a smooth, unstruck crescent. Because the collar usually is not in place around the misfed blank, the coin often spreads out and loses its normal edge.
Off-center errors are described by percentage: a coin 5 percent off center shows almost the full design, while one 50 percent off center shows only half. Collectors generally prefer coins that are clearly off center but still show the full date, because the date confirms when and, through the mint mark, where the coin was made. Strikes so far off center that the design barely touches the blank are less useful for identification. Modern feeding systems have made large off-center errors uncommon in recent coinage.
Double Strike
A double strike occurs when a coin is not ejected from the press after the first blow and is struck a second time. If the coin has shifted or rotated between blows, the second impression lands on top of the first, producing two overlapping designs. Many double strikes have a centred first strike and an off-center second one; others show a flat area where the second blow struck over a coin that had flipped or moved.
A double strike should not be confused with a doubled die. A doubled die is a die error, in which the die itself received a doubled image when it was made, so every coin from that die shows the same doubling in exactly the same place. A double strike is a separate event affecting one coin, and the doubling varies from piece to piece. Dramatic double strikes are rare in circulation because of ejection mechanisms and inspection, which is why they are prized by error collectors.
Brockage
A brockage is an error in which a coin that has just been struck sticks to one of the dies. When the next blank is fed in, the stuck coin acts as a die itself and presses its own design into the new blank. The result is a coin with a normal design on one side and a mirror-image, sunken (incuse) copy of the same design on the other.
A full brockage shows the complete mirror image; a partial brockage occurs when the stuck coin was offset, leaving only part of the reversed design. If a struck coin stays on a die for many strikes, it is gradually deformed into a cap shape, called a die cap, and the brockage images grow weaker and more distorted. Brockages were relatively common on hand-struck and early machine-struck coinage. Modern high-speed presses, automatic ejection and inspection have made them rare.
Struck Through
A struck-through error, often written struck thru, happens when a foreign object sits between the die and the blank at the moment of striking. The object blocks part of the design, leaving that area weak or missing, and may leave its own imprint on the coin. Common causes include grease, cloth fibres, wire, metal fragments, staples and pieces of other blanks.
The most frequent form is struck through grease, where a buildup of grease or dirt in the recesses of a die fills part of the design, so lettering or details come out faint or absent. Strictly this is often classed as a die-related problem because the die is filled, but it is widely grouped with struck-through errors. Strikes through cloth or wire are rarer and easier to recognise, since the texture of the object is pressed into the coin.
Clipped Planchet
A clipped planchet is a blank with a missing segment, caused when the blanking press punches into an area of the metal strip that has already been punched or past the edge of the strip. A curved clip is the most common, created when a punch overlaps a previous hole. A straight clip arises from the end or edge of the strip, and a ragged clip from the irregular end of a strip.
Genuine clips show a weak rim opposite the clipped area, because the missing metal prevents the rim from forming fully; this feature helps separate real clips from post-mint damage, where someone cuts a piece from a finished coin. Mint clipping errors are also distinct from historical coin clipping, a fraud in which people shaved precious metal from the edges of gold and silver coins, similar to sweating. That practice reduced the metal in circulation, contributed to currency debasement and led to milled edges and episodes of recoinage.
Comparing the errors
| Error | Stage | Key sign |
|---|---|---|
| Off-center strike | Striking | Blank crescent with part of the design missing |
| Double strike | Striking | Two overlapping impressions, varying by coin |
| Brockage | Striking | Mirror-image incuse design on one side |
| Struck through | Striking | Missing detail or imprint of an object |
| Clipped planchet | Blank | Missing segment with weak rim opposite |
The features named in these descriptions, such as the rim, edge and field, are explained under parts of a coin. Grading services assess error coins alongside normal coin grading, and they also screen for fakes such as altered or counterfeit pieces made to look like errors.
Ref 1150000116