Coin production methods and records are the terms used for the ways coins have been manufactured and for the marks and figures that identify their origin. Over about 2,600 years, mints moved from pouring metal into moulds and striking blanks by hand to machine presses that produce identical coins at high speed. Each change made coins more uniform and harder to cut, file or copy.
The family has two parts. Hammered, cast and milled coinage describe production methods, and matter to monetary history because the method shaped how easily coins could be debased, clipped or forged. Mint marks and mintage are records: a mint mark tells which mint struck a coin, and mintage tells how many were made. Historians, central banks and collectors in numismatics use both to date and trace coins.
Cast Coin
A cast coin is made by pouring molten metal into a mould rather than striking a blank between dies. Several coins were usually cast at once in a mould shaped like a tree, then broken apart and filed smooth. Casting was the main method in ancient China, where round coins with a square central hole, beginning with types such as the ban liang, were cast for more than two thousand years. Early Rome also cast large bronze coins, the aes grave, before the as was reduced in size and struck.
Casting suits base metals and low-value coins but gives softer detail than striking. That weakness is why casting is also a common forgery method: a counterfeiter can take a mould from a genuine coin. Cast forgeries often show tiny bubbles, soft edges and a slightly smaller size caused by shrinkage of the metal.
Hammered Coinage
Hammered coinage is made by hand. A blank of metal is placed on a lower die fixed in a block, an upper die is held on top, and the moneyer strikes it with a hammer to impress both designs at once. This was the standard method in Europe from ancient Greece until the early modern period; in England it lasted into the 1660s.
Hammered coins vary in shape, thickness and centring, and their edges are plain and often irregular. That made them easy to clip: people shaved slivers of silver or gold from the edge and passed the lighter coin on at full value. Widespread clipping lowered the real metal content of the money supply, encouraged hoarding of good coins under Gresham's law, and eventually forced governments to undertake a recoinage.
Milled Coinage
Milled coinage is coinage made by machine rather than by hand. The name comes from the horse- or water-powered mills used to roll metal strips and drive the presses. In England, machine-struck coins were first made at the Tower Mint from around 1561 under Elizabeth I by the Frenchman Eloy Mestrelle, but the experiment was abandoned. Machine production returned in the mid-seventeenth century, and from 1662, under Charles II, it fully replaced hammering at the mint now known as the Royal Mint.
Screw presses, and later steam and electric presses, produced round coins of even weight and thickness. Machines could also mark the edge with grooves or lettering, so any clipping became obvious at once. Milled coinage therefore helped end clipping, supported confidence in coin weight, and paved the way for modern minting processes.
Mint Mark
A mint mark is a letter or symbol on a coin that shows which mint struck it. Countries with several mints use them so that each facility's output can be traced and its quality checked. In the United States the main marks are P for Philadelphia, D for Denver, S for San Francisco and W for West Point, with historic marks such as O for New Orleans and CC for Carson City; the United States Mint facilities page covers each site.
The mark usually sits in a small, fixed position on the obverse or reverse. Coins from the Philadelphia mint long carried no mark at all. United Kingdom coins generally carry no mint mark, since most are struck at a single mint. Because some mints struck far fewer coins of a given year, the mint mark can make a large difference to how scarce a coin is.
Mintage
Mintage is the number of coins of a given type, date and mint that were struck. Mints publish mintage figures in annual reports and catalogues, and they are the starting point for judging how common a coin is. A circulating coin may have a mintage in the hundreds of millions or billions, while a proof or commemorative issue may be limited to a few thousand.
Mintage is not the same as rarity. What matters is how many coins survive, and in what condition. Many coins were later melted, lost or worn out, so the surviving population can be far smaller than the mintage; others were saved in quantity and remain common. Marketing that stresses a "limited mintage" does not by itself mean a coin will become scarce, a point also raised in discussions of collectibles as investments.
How the terms compare
| Term | Kind | Key feature |
|---|---|---|
| Cast coin | Method | Molten metal poured into moulds |
| Hammered coinage | Method | Struck by hand; irregular, easy to clip |
| Milled coinage | Method | Machine-struck; uniform, edge marked |
| Mint mark | Record | Shows which mint struck the coin |
| Mintage | Record | Number of coins struck |
Ref 1150000109