Unconventional oil and gas is the collective name for hydrocarbons produced from formations that cannot be developed economically with ordinary vertical wells, such as tight oil, shale gas, oil sands and coalbed methane. The term describes the rock and the extraction method rather than the product: once produced, tight oil is ordinary light crude oil and shale gas is ordinary natural gas.
The family matters to commodity markets because US shale and tight production transformed global supply in the 2010s, changed price relationships between benchmarks such as West Texas Intermediate (WTI) and Brent, turned the United States into a large exporter of crude oil and liquefied natural gas, and forced OPEC+ to rethink its output strategy. Canadian oil sands, by contrast, are a high-cost, long-life source priced at a discount to US benchmarks. The US Energy Information Administration reports production from these sources separately.
Conventional vs. Unconventional Resources
Conventional resources are oil and gas that have migrated into porous, permeable reservoir rock, such as sandstone, and are trapped beneath an impermeable seal, so a vertical well can tap them and natural pressure drives fluids to the surface. Unconventional resources sit in rock with very low permeability, such as shale, or in forms that do not flow at all, such as bitumen. Producing them requires horizontal drilling, hydraulic fracturing (pumping water, sand and chemicals at high pressure to crack the rock), surface mining or steam injection.
The cost structure differs sharply. Shale wells are relatively cheap and quick to drill, but their output falls steeply in the first year or two, so producers must keep drilling to hold volumes steady. That short cycle makes unconventional supply more responsive to prices than large conventional projects, which take years to build and then produce for decades. Producing states also collect a severance tax on output, which affects well economics.
Tight Oil
Tight oil is light crude produced from low-permeability shale, sandstone or carbonate formations using horizontal wells and multistage hydraulic fracturing. It is often called shale oil, but it is distinct from oil shale, a rock containing kerogen that must be heated to yield oil. The main US plays are the Permian Basin of Texas and New Mexico, the Bakken in North Dakota and the Eagle Ford in Texas.
Tight oil growth from about 2010 lifted US crude output to record levels and made the United States the world's largest crude producer later in the decade. The surge widened the WTI–Brent spread while pipelines were short, contributed to the 2014–2016 oil price fall, and preceded the end of most limits on US crude exports in December 2015. OPEC's decision in late 2014 not to cut output, and the wider OPEC+ arrangement with Russia and other producers from late 2016, were partly responses to shale. US production figures are tracked in U.S. petroleum supply statistics.
Shale Gas
Shale gas is natural gas produced from shale formations using horizontal drilling and hydraulic fracturing. The techniques were proven commercially in the Barnett Shale of Texas around the turn of the century, and production then spread to the Marcellus and Utica formations in Appalachia and the Haynesville in Louisiana and East Texas. Shale became the largest source of US gas production.
The added supply pushed prices at Henry Hub well below oil-linked gas prices in Europe and Asia for much of the 2010s, encouraged power generators to switch from coal to gas, and allowed Gulf Coast terminals to begin exporting cargoes of liquefied natural gas from 2016. Associated gas from tight oil wells, produced whatever the gas price, adds further supply, and pipeline bottlenecks can leave regional hubs trading at a deep basis to Henry Hub.
Oil Sands (Tar Sands)
Oil sands, also called tar sands, are deposits of sand and clay saturated with bitumen, a heavy, viscous form of petroleum. The largest deposits are in Alberta, Canada, mainly in the Athabasca, Cold Lake and Peace River areas. Near-surface deposits are mined with trucks and shovels and the bitumen separated with hot water; deeper deposits are produced in situ, most often by steam-assisted gravity drainage (SAGD), which injects steam so the bitumen flows to a well. Bitumen is diluted or upgraded into synthetic crude before it moves by pipeline or rail.
Projects are capital-intensive with high operating costs but long, flat production profiles. Alberta heavy crude is priced through Western Canadian Select (WCS), quoted as a differential to WTI. The discount reflects heavy, sour quality, which yields fewer light petroleum products per barrel, and the cost and availability of pipeline capacity to US refineries; it widens sharply when export pipelines are full.
Ref 1180002011