Middle distillate fuels are the group of refined oil products that boil between light products such as gasoline and naphtha and the heavy residual fuel oils at the bottom of the barrel. The family includes diesel, heating oil, gasoil and kerosene-type jet fuel. Together they are among the most traded petroleum products in the world, used by trucks, ships, farms, airlines, power back-up and home heating.
The members overlap heavily. Diesel, heating oil and gasoil are close chemical cousins sold under different names and sulfur limits in different regions, and jet fuel is a slightly lighter cut from the same part of the distillation column. In the United States the U.S. Energy Information Administration (EIA) groups most of them as distillate fuel oil. Prices are set off two futures benchmarks, NYMEX NY Harbor ULSD in New York and ICE Low Sulphur Gasoil in London, and refiners watch the margin between these products and crude oil closely.
Middle Distillates
Middle distillates is the refinery term for the products drawn from the middle section of a crude distillation unit and from conversion units such as hydrocrackers. The cut covers kerosene and jet fuel at the lighter end and diesel, gasoil and heating oil at the heavier end. The share of middle distillates a refinery can make depends on the crude it runs and on its equipment: heavier, more complex refineries can upgrade more of each barrel into these higher-value fuels.
For traders the key number is the middle-distillate crack spread, the difference between the price of diesel or gasoil and the price of crude. A wide spread signals strong demand or tight refining capacity and encourages refiners to run harder. NY Harbor ULSD and ICE gasoil futures are the reference prices against which most physical cargoes, swaps and options in the group are priced.
Distillate Fuel Oil
Distillate fuel oil is the umbrella category the EIA uses for diesel fuels and fuel oils, including No. 1, No. 2 and No. 4 grades. It covers on-highway and off-highway diesel, railroad and marine diesel, and the heating oils used in homes and commercial boilers. Because the category is so broad, it is one of the main headings in US oil data alongside gasoline and jet fuel.
The weekly EIA estimate of US distillate stocks, published in the Weekly Petroleum Status Report, is a market-moving release for ULSD futures. Stocks usually build in the autumn and draw down in winter as heating demand rises, with further demand from farm harvests and freight. Traders compare each week's figure with expectations and with the seasonal range for that time of year, since a draw much larger than normal can tighten prices quickly.
Diesel Fuel
Diesel fuel is the middle-distillate fuel burned in compression-ignition engines, the engines used in most trucks, buses, trains, ships, tractors and construction machinery. It is ignited by the heat of compressed air rather than by a spark, and it carries more energy per gallon than gasoline. On-road diesel in the US and Europe must meet strict sulfur limits, while some off-road and marine fuels have historically been allowed more.
Because so much freight moves by diesel truck, rail and ship, diesel demand rises and falls with industrial output and trade, and its price is often read as a gauge of economic activity. Retail prices reflect the wholesale price set by ULSD and gasoil futures, plus taxes, distribution costs and margins. Refiners and traders track the diesel crack spread to decide how much diesel to produce, and fleets, railways and farmers often use futures or swaps for hedging their fuel bills.
Ultra-Low Sulfur Diesel (ULSD)
Ultra-low sulfur diesel (ULSD) is diesel fuel with a sulfur content of no more than 15 parts per million (ppm). It became the US standard for on-highway diesel under rules from the Environmental Protection Agency phased in from 2006, later extended to off-road, locomotive and marine engines. The low sulfur level allows the use of exhaust treatment systems that cut soot and nitrogen oxides. Europe applies a stricter limit of 10 ppm for road diesel.
The NYMEX NY Harbor ULSD futures contract, traded on the New York Mercantile Exchange (NYMEX), is the main US distillate price benchmark. It is the successor to the long-running heating oil contract, whose delivery specification was switched to ULSD in 2013. The contract is for 42,000 US gallons (1,000 barrels), is quoted in dollars and cents per gallon and is physically delivered in New York Harbor. It is often paired with RBOB gasoline futures and crude in refining spread trades.
Heating Oil
Heating oil, formally No. 2 fuel oil, is a distillate burned in home furnaces and commercial boilers. It is chemically very close to diesel and historically differed mainly in being allowed a higher sulfur content, though many US states, particularly in the Northeast, now require low-sulfur or ultra-low-sulfur heating oil. The US Northeast is the largest market for residential heating oil.
Heating oil gave its name to one of the first energy futures contracts: NYMEX launched heating oil futures in 1978, and for decades the contract was the standard way to price and hedge distillates in the US. In 2013 the delivery grade was changed to ultra-low sulfur diesel, and the contract became NY Harbor ULSD, although the industry still often calls it heating oil. Demand is strongly seasonal, peaking in cold winters, and traders follow heating degree days to anticipate it.
Gasoil
Gasoil is the name used in Europe, Asia and international trade for the diesel and heating-oil grade of middle distillate. The term covers road diesel, heating gasoil and some marine gasoils, each with its own sulfur specification. Large volumes move by tanker into Europe from Russia, the Middle East, India and the US, and the Amsterdam-Rotterdam-Antwerp (ARA) region is the main European storage and blending hub.
The ICE Low Sulphur Gasoil futures contract, traded on ICE Futures Europe in London, is the main international benchmark for middle distillates. Unlike US contracts, it is priced in US dollars per metric tonne, and the standard contract is 100 tonnes, with delivery in the ARA area. Traders convert between tonnes and barrels or gallons to compare it with NYMEX ULSD, and the spread between the two contracts reflects transatlantic freight costs and regional supply and demand. Gasoil is also the reference for many Asian and Middle Eastern diesel prices.
Jet Fuel
Jet fuel is a kerosene-type fuel used in turbine aircraft engines. The two main grades are Jet A, used mainly within the United States, and Jet A-1, the international grade, which has a lower freezing point for long high-altitude flights. Jet fuel is produced from the lighter end of the middle-distillate cut and must meet strict specifications for purity, stability and cold-weather performance.
There is no widely used exchange futures contract for jet fuel itself. Physical cargoes are usually priced against daily assessments from price reporting agencies, and airlines and traders use over-the-counter jet fuel swaps. Because those markets are thinner, airlines often hedge with more liquid heating oil, ULSD or gasoil futures as a proxy, accepting some basis risk. The jet crack spread, the margin of jet fuel over crude, is a common measure of refining profitability for the product.
How the middle distillates compare
| Product | Main use | Main price benchmark |
|---|---|---|
| Diesel and ULSD | Road, rail, farm and off-road engines | NYMEX NY Harbor ULSD; ICE Low Sulphur Gasoil |
| Heating oil | Home and commercial heating | NYMEX NY Harbor ULSD |
| Gasoil | Diesel and heating outside the US | ICE Low Sulphur Gasoil |
| Jet fuel | Turbine aircraft | Price reporting agency assessments and swaps |
External links
Ref 1180001998