Home / Wiki / S / Spark Spread

Spark Spread

Investment and Capital MarketsUpdated 16 Nov 2026

The spark spread is the difference between the price of electricity and the cost of the natural gas needed to generate it. It is a rough measure of the gross margin that a gas-fired power plant earns on each unit of electricity it sells, before operating costs, capital costs and any charge for emissions.

The spark spread is a processing margin of the same kind as the crack spread in oil refining and the crush spread in soybean processing: the value of an output less the cost of the input. Plant operators, utilities, traders and analysts use it to judge the profitability of gas generation, to decide whether a plant should run, and to trade the relationship between power and gas prices. The equivalent measure for coal-fired plants is called the dark spread.

01

Formula and example

The standard calculation is:

Spark spread=PE−(PG×HR)\text{Spark spread} = P_E - (P_G \times HR)
  • PEP_E is the price of electricity, in dollars per megawatt-hour.
  • PGP_G is the price of natural gas, in dollars per million British thermal units.
  • HRHR is the heat rate of the plant, the amount of fuel, in million British thermal units, needed to produce one megawatt-hour.

The heat rate measures efficiency, and a lower figure is better. A modern combined-cycle plant has a heat rate of about 7, while older or simpler units need 10 or more. Suppose the wholesale electricity price is $45 per megawatt-hour and gas at Henry Hub costs $3.50. For a plant with a heat rate of 7, the fuel cost is 3.50×7=24.503.50 \times 7 = 24.50 dollars and the spark spread is 45−24.50=20.5045 - 24.50 = 20.50 dollars per megawatt-hour. For a plant with a heat rate of 10, the fuel cost is $35 and the spread is $10.

In Europe, gas is priced per unit of energy, so the gas price is divided by the plant's efficiency instead of being multiplied by a heat rate. With power at 80 euros, gas at 30 euros and an efficiency of 50 percent, the fuel cost is 30/0.5=6030 / 0.5 = 60 euros and the spread is 20 euros.

02

Clean spark spread and implied heat rate

Where generators must buy emission allowances, the cost of carbon is deducted to give the clean spark spread:

Clean spark spread=PE−(PG×HR)−(PC×EF)\text{Clean spark spread} = P_E - (P_G \times HR) - (P_C \times EF)

where PCP_C is the price of an allowance for one tonne of carbon dioxide and EFEF is the plant's emissions in tonnes per megawatt-hour. Continuing the European example with a carbon price of 70 euros and emissions of 0.37 tonnes, the carbon cost is 70×0.37=25.9070 \times 0.37 = 25.90 euros and the clean spark spread is 20−25.90=−5.9020 - 25.90 = -5.90 euros. The plant would lose money by running. Comparing the clean spark spread with the clean dark spread shows whether gas or coal is the cheaper fuel, which drives switching between them.

A related figure is the implied or market heat rate, the power price divided by the gas price. In the first example it is 45/3.50=12.945 / 3.50 = 12.9. Any plant with a heat rate below that level covers its fuel cost.

03

Uses

  • Dispatch. A plant is worth running when the spread exceeds its other variable costs, and is switched off when it does not.
  • Hedging. A generator can fix its margin by selling power and buying gas for the same future period, a form of hedging that locks in the spread shown by the forward curve.
  • Trading. Traders take positions in the spread itself through an electricity and a gas futures contract, an intercommodity spread within the wider practice of spread trading.
  • Valuation. Because the owner can choose not to run when the spread is negative, a plant is often valued as a series of options on the spark spread, one for each future period.

Sustained high spreads signal a shortage of generating capacity and encourage investment, while low spreads lead to mothballing and closures.

04

What moves the spread

Weather is the main short-term influence. Heat waves and cold spells raise electricity demand and widen the spread, which is one reason generators also use a weather derivative to manage revenue. Output from renewable energy matters increasingly: wind and solar plants have almost no running cost, so power prices and spreads fall in windy or sunny hours. Gas supply disruptions, plant outages, hydroelectric conditions and carbon prices also move it. The spread differs between peak and off-peak hours and between regions.

05

Limitations

The spark spread is an indicator, not a measure of profit. It leaves out operation and maintenance, start-up costs, transmission charges and financing. It uses benchmark prices at trading hubs, which may differ from the prices a given plant pays and receives, and a standard heat rate that may not match the plant. Daily or monthly averages hide the hourly swings that decide when a flexible plant runs. Income from capacity payments or from a power purchase agreement is not included.

Last updated 16 Nov 2026