Ship tonnage and capacity measures are the units used to describe how big a ship is, how much it can carry and how much cargo space a given cargo uses. The word tonnage covers several different things, some of them weights and some of them volumes, so the terms should not be confused. Each serves a different purpose: deadweight is used for chartering and sale prices, gross and net tonnage for regulation and fees, and stowage measures for working out how much cargo fits.
Cargo is mostly bulk cargo or containers, and the right measure depends on which. The weight and volume measures are the basis for charges such as port call charges, and for classes such as those in dry bulk ship size classes. The international rules on measurement were set by the International Maritime Organization, whose work is covered in IMO conventions, codes and ship certificates. In running freight calculations, the measures decide whether cargo is charged by weight or by volume.
Deadweight Tonnage (DWT)
Deadweight tonnage (DWT) is the maximum weight a ship can carry when loaded to its permitted draft, covering cargo, fuel, fresh water, stores and crew. It is the difference between the ship's displacement when fully loaded and its displacement when empty. It is expressed in tonnes, and it is the figure most often used in chartering, in market classes and in sale and purchase prices.
It differs from displacement, which is the total weight of the ship, and from gross tonnage, which is a volume. Hire and Baltic Exchange rate assessments are quoted by deadweight class, but the usable cargo capacity is lower than the deadweight because fuel and stores take a share of it.
Gross Tonnage (GT)
Gross tonnage (GT) is a dimensionless measure of a ship's total enclosed internal volume, fixed by the International Convention on Tonnage Measurement of Ships, 1969. It is calculated from the volume of all enclosed spaces, using a formula of the form:
- is the total volume of all enclosed spaces of the ship, in cubic metres.
- is a coefficient that rises slowly with the volume.
For a ship with a volume of 100,000 cubic metres, , so and . Gross tonnage is used in registration, safety and manning rules and in many port dues, and it is unrelated to the ship's weight.
Net Tonnage (NT)
Net tonnage (NT) is a dimensionless measure derived from the volume of a ship's cargo spaces, calculated under the same 1969 convention. It is meant to express the earning capacity of the ship, and it is based on the volume of cargo holds, the ship's draft and the number of passengers, with a minimum relative to gross tonnage.
It is always smaller than gross tonnage. Port dues, registry fees and some canal tolls have been calculated on net tonnage, though many authorities have moved to gross tonnage or to their own measurement systems, so the basis varies by port and canal.
Safe Working Load (SWL)
Safe working load (SWL) is the maximum load that a crane, derrick, hook or other lifting gear may carry in normal use. It is marked on the equipment and recorded in the certificates of the ship's cargo gear, and is checked by periodic testing and inspection by a classification society or competent authority.
Charterers and terminals check it before loading heavy or project cargo, because exceeding it risks injury, damage and liability. Many ports and charters require the ship's gear to be certified, and the SWL decides which cargoes a geared ship can discharge without shore cranes.
Stowage Factor
The stowage factor is the volume that one tonne of a particular cargo occupies in the hold, expressed in cubic metres per tonne, or in cubic feet per ton. It is used with the hold capacity to find how much cargo fits, in this form:
- is the volume available for cargo, in cubic metres.
- is the volume per tonne of the cargo, in cubic metres per tonne.
For a hold of 40,000 cubic metres and a cargo with a stowage factor of 1.3 cubic metres per tonne, the cargo is tonnes, so a ship is full by volume before it reaches its deadweight when carrying light cargoes.
Broken Stowage
Broken stowage is the space lost in a hold because cargo does not fit perfectly around the shape of the hold, the frames and other cargo. It is usually stated as a percentage of the space, and it is greater for packaged and irregular cargo than for bulk cargo that flows freely into every corner.
If the hold in the example above loses five per cent of its volume, only 38,000 cubic metres are usable, and the cargo that fits is tonnes. Allowance for it is built into voyage estimates, and the resulting figure may be set against the carrying capacity in ship operating costs and earnings.
Ref 1060000359