Home / Wiki / C / Choppiness Index

Choppiness Index

Trading and SpeculationUpdated 16 Nov 2026

The Choppiness Index is an indicator used in technical analysis to judge whether a market is moving in a sustained direction or drifting sideways in an irregular, choppy fashion. It produces a value between 0 and 100. High values indicate a sideways market and low values a trending one. The indicator says nothing about whether the trend is up or down.

It was developed by the Australian commodity trader E. W. Dreiss and draws loosely on ideas from fractal geometry. Traders use it mainly as a filter that tells them which type of strategy suits current conditions. It is often compared with the average directional index, which also measures trend strength without direction, and with the simpler, colour-coded Chop Zone.

01

Formula

The standard calculation is:

CHOP=100×log⁡10(∑i=1nTRiHn−Ln)log⁡10(n)\text{CHOP} = 100 \times \frac{\log_{10} \left( \frac{\sum_{i=1}^{n} \text{TR}_i}{H_n - L_n} \right)}{\log_{10}(n)}
  • TRi\text{TR}_i is the true range of period ii, the measure used in the average true range: the largest of the period's high minus low, the high minus the previous close, and the previous close minus the low, taken as absolute values.
  • HnH_n is the highest high over the last nn periods.
  • LnL_n is the lowest low over the last nn periods.
  • nn is the lookback length, 14 by default.

The ratio inside the logarithm compares the total distance the price travelled, bar by bar, with the net range it covered. If the price moves steadily in one direction with no overlap between bars, the sum of true ranges equals the overall range, the ratio is 1, and the index is 0. If every bar spans the whole range, the sum is nn times the range and the index is 100.

02

Worked example

Take a 14-period window in which the true ranges add up to 28 points. In the first case the highest high is 110 and the lowest low is 100, a range of 10. The ratio is 28/10=2.828 / 10 = 2.8. Since log⁡10(2.8)=0.447\log_{10}(2.8) = 0.447 and log⁡10(14)=1.146\log_{10}(14) = 1.146, the index is 100×0.447/1.146=39.0100 \times 0.447 / 1.146 = 39.0, a reading typical of a trending market.

In the second case the bars are the same size but overlap heavily, so the highest high is 104 and the lowest low is 100, a range of 4. The ratio is 28/4=728 / 4 = 7, log⁡10(7)=0.845\log_{10}(7) = 0.845, and the index is 100×0.845/1.146=73.7100 \times 0.845 / 1.146 = 73.7, indicating a choppy market. The same amount of bar-by-bar movement produced far less net progress.

03

Interpretation

The conventional thresholds are 61.8 and 38.2, numbers borrowed from Fibonacci ratios. Readings above 61.8 are taken to show consolidation, and readings below 38.2 a strong trend. Values in between are treated as indeterminate. The thresholds are conventions, and some traders use 60 and 40 or adjust them to the market concerned.

The indicator is used in two main ways. The first is as a regime filter. Rules based on trend following, such as a moving average crossover, are applied only when the index is low or falling, while approaches based on mean reversion are preferred when it is high. The second is as a warning of change. A long spell of high readings shows compressed, overlapping bars, a condition that often comes before a sharp move, so some traders watch for the index to turn down from a high level as a setup for breakout trading. In the same way, a very low reading late in a trend may suggest that the move is extended.

The average directional index measures trend strength from directional movement, the extent to which each bar's range lies above or below the previous bar's. The Choppiness Index instead compares path length with net displacement, a calculation close to the efficiency ratio used in adaptive moving averages. The two usually agree, moving in opposite directions, since a high directional reading corresponds to a low choppiness reading.

Measures of volatility answer a different question. A market can be volatile and trending, or volatile and directionless. The Bollinger Band squeeze identifies periods of low volatility, which often but not always coincide with high choppiness.

05

Limitations

The index describes the recent past and lags changes in market behaviour by roughly half its lookback period. A trend that has just begun will still show a high reading, and one that has just ended a low reading. Because it gives no direction, it cannot be used on its own to generate trades and has to be paired with a directional tool or with price levels such as a support level.

The result is sensitive to the lookback length and to a single wide-ranging bar, which lowers the reading for as long as it stays in the window. As with other indicators, thresholds chosen by backtesting on one market may reflect overfitting and may not carry over to another market or period.

Last updated 16 Nov 2026