Banknote security features are the design, printing and material elements built into paper money to make it hard to copy and easy to check. They include intaglio (raised) printing, security threads, colour-shifting ink, watermarks, holograms and microprinting. Central banks and national printing works choose a mix of features for each note, and the same features are taught to cashiers, retailers and the public so that a suspect note can be spotted in seconds.
The features exist because banknotes are worth far more than the cost of making them, which makes counterfeit money attractive to criminals. Good features are layered: some can be checked by touch or by tilting the note, others need ultraviolet light or a machine, and a few are known only to the issuer. In the United States the Federal Reserve note uses several of the features described below, as do the notes of the Bank of England and most other issuers.
Intaglio Printing
Intaglio printing, also called plate printing or steel-plate printing, is the main security printing method for banknotes. The design is engraved or etched into a metal plate as fine grooves. Ink is spread over the plate, the surface is wiped clean so ink stays only in the grooves, and the paper is pressed against the plate under very high pressure. The paper is forced into the grooves and picks up a thick, slightly raised layer of ink.
The result can be felt with a fingertip, especially on portraits, numerals and lettering, and it gives genuine notes their crisp, sharp lines. Ordinary office printers and offset presses lay down flat ink and cannot copy the texture or the very fine line work of a hand-engraved portrait. Intaglio is usually combined with offset printing for background colours, so a note carries both flat and raised ink. The technique is slow and the presses and plates are expensive, which is one reason it remains largely in the hands of state printing works and a small number of specialist security printers.
Security Thread
A security thread is a thin strip of plastic or metallised film built into the paper or substrate of a note while it is being made, not printed on afterwards. On many notes the thread is fully embedded and shows as a dark line only when the note is held up to the light. A windowed thread weaves in and out of the paper surface, so it appears as a row of shiny dashes on one side.
Threads often carry tiny printed text, such as the denomination or the issuer's name, and some glow in a particular colour under ultraviolet light. On current United States notes from the $5 upward, the thread sits in a different position on each denomination and glows a different colour, which helps detect a low-value note that has been bleached and reprinted as a higher one. Because the thread is part of the paper, a forger has to imitate it with a printed line or a strip glued between two sheets, both of which are usually easy to detect. On a polymer banknote, transparent windows and foils often take over the thread's role.
Color-Shifting Ink
Color-shifting ink, known more formally as optically variable ink, is a printing ink that changes colour when a note is tilted. It contains tiny flakes that reflect light differently depending on the viewing angle, so a numeral or emblem may appear copper from one angle and green from another. The effect cannot be reproduced by a photocopier or scanner, which can only record a single fixed colour.
On current United States notes of $10 and higher, the denomination numeral in the lower right corner of the front is printed in color-shifting ink, and the redesigned $100 also has a bell inside an inkwell that shifts colour. Cashiers are taught a quick check: tilt the note and watch whether the colour changes smoothly. The ink is costly and is sold only to authorised security printers, which limits its availability to counterfeiters. Because it is expensive, issuers tend to reserve it for the higher denominations that are most worth faking.
Other common features
- Watermarks. An image formed by varying the thickness of the paper during manufacture, visible from both sides when held to the light.
- Holograms and foils. Metallic patches or stripes that show changing images and are very hard to reproduce, widely used on euro and sterling notes.
- Microprinting. Lettering so small that it looks like a line to the naked eye and blurs when copied.
- Ultraviolet and machine-readable features. Inks and fibres that glow under ultraviolet light, plus magnetic and infrared features read by note-sorting machines and cash machines.
Comparing the main features
| Feature | How it is checked | Why it is hard to copy |
|---|---|---|
| Intaglio printing | Touch: raised ink on portrait and numerals | Needs engraved plates and high-pressure presses |
| Security thread | Hold to light; ultraviolet glow on some notes | Built into the paper during manufacture |
| Color-shifting ink | Tilt the note and watch the colour change | Special ink sold only to security printers |
Issuers refresh features with each new series as copying technology improves. Notes that fail checks are withdrawn from circulation, and cash-handling equipment such as the automated teller machine relies on the machine-readable features to reject suspect notes. Security features also sit alongside legal protection: making or knowingly passing forged notes is a serious crime in almost every country, and only genuine notes are legal tender. Public education about each series helps protect trust in cash.
External links
Ref 1080000324